Embarking on the adventure of building your first 5″ FPV drone is a journey filled with unexpected twists and a bit of chaos. You find yourself piecing together a unique version of Mr. Steele’s iconic Apex drone, adjusting plans on the fly due to parts scarcity. Despite initial plans for a swift assembly, the reality unfolds with compatibility surprises and a hefty ten-hour assembly marathon. Yet, each challenge becomes a learning milestone, leading you to the thrill of overcoming obstacles and finally seeing your creation take to the skies.
Your persistence pays off as you navigate through missteps like reversed propeller installations and binding troubles with the remote. Test flights morph from frustration into rewarding experiences as you eventually master the art of flying. As you gain confidence, you ambitiously venture into advanced maneuvers, testing your mettle with feats like the knife edge gap. The process quickens with your second drone build, clocking in at nearly half the initial time, clearly showcasing your growth and adaptability in this exhilarating hobby.
After months of flying a Cinewhoop and making endless repairs, you decided it was finally time to build your first 5″ FPV drone. Following Mr. Steele’s iconic Apex build (with some key modifications), you set out to assemble, bind, and fly your first real freestyle quad. It didn’t go smoothly… but it did finally fly.
In this video: watch the full process — from first solder to first crash, to a new drone, knife edge gaps, and surviving the brutal learning curve of FPV drones.
Subscribe for more FPV flying, building, and adventure.
Support on Patreon: / dylanmagaster
Support with Bitcoin: 1C2GuZPscVskvzScBJSQpdeXqGz2moJHaC
Follow Dylan Magaster:
/ dylanmagaster
Chapters
Business inquiries or music submissions:
Music:
https://mbsy.co/epidemicsound/FLORB
Filmed and edited by
Dylan Magaster:
/ dylanmagaster
Settling on the 5″ FPV Drone Build
Transition from Cinewhoop to FPV Drone
As you journey through the world of drones, you might find yourself evolving beyond the initial phases of flying a Cinewhoop, much like many enthusiasts do. The Cinewhoop is fantastic for stable, cinematic shots, but there comes a point when you might crave more speed, agility, and a taste of the freestyle world. This is when you realize it’s time to transition to a more capable machine, such as a 5” FPV drone. The thought of building your own drone rather than buying a pre-built one adds an element of excitement and challenge, promising a rewarding experience through learning and creation.
Why Mr. Steele’s Iconic Apex Build?
When deciding on your FPV setup, you may be drawn to Mr. Steele’s iconic Apex build. Mr. Steele is a well-known figure in the FPV community for his expertise and high-performance builds. His Apex build is renowned for its durability, precision, and seamless integration of components. By following his example, you align yourself with a tried-and-tested formula while also incorporating your personal touches. This ensures a blend of reliability and customization, making your drone uniquely yours.
Preparing for the Build
Sourcing the Necessary Parts
Embarking on your first build requires gathering all necessary components, ranging from the frame and motors to smaller items like screws and wires. This process might feel overwhelming at first, but with careful planning, it becomes an engaging puzzle to solve. Crafting a detailed checklist ensures that you won’t forget crucial parts and will save you multiple trips to various stores or websites. You may rely on local hobby shops or online forums for insider tips on where to get the best deals and hardest-to-find components.
Challenges of Parts Unavailability and Substitutions
One of the first hurdles in your building journey may be the unavailability of certain parts. Sometimes, the exact components used in popular builds like Mr. Steele’s may not be in stock. When this happens, substitutions become necessary, and you’ll need to research compatible alternatives that don’t compromise performance. This step, although daunting, enhances your understanding of the various parts and how they contribute to the drone’s overall performance. Flexibility and creativity will be your allies as you adapt your build to what’s available.
Tackling the Assembly
Initial Setup and Expectations
As you lay out all your parts and tools, the initial setup stage has a sense of excitement mixed with anticipation. You might start with high expectations, envisioning a smooth few hours of assembly. However, keep in mind that this is your first build, and there will be a learning curve. Approach the process with patience, recognizing that challenges are opportunities for learning. This mindset will help you adapt through the assembly process, setting a realistic pace for your progress.
Time Management and Unexpected Delays
Building a drone is often more time-consuming than you initially anticipate. You might aim for a four-hour build but quickly realize that unforeseen issues can extend this timeframe. Maybe you encounter a fitting problem, or perhaps soldering isn’t going as smoothly as planned. This is where effective time management comes in. Allow yourself breaks and accept that rushing might lead to mistakes. Embrace the learning curve, recognizing that each delay is teaching you something valuable about the drone-building process.
Facing Challenges During Construction
Combatting Parts Compatibility Issues
Even with careful planning, parts compatibility can surprise you. Maybe a motor doesn’t fit the frame as snugly as it should, or a component needs a slight modification to work harmoniously with others. These minor incompatibilities require patience and problem-solving to fix. Each issue resolved increases your understanding and skill, enabling you to navigate future builds with greater ease. Documenting these fixes also creates a personal handbook of solutions for future reference.
Handling Unforeseen Technical Obstacles
Apart from compatibility issues, technical obstacles might arise that require deeper problem-solving. For instance, programming the flight controller or tuning the PID settings can become complex and require extra research. When faced with these obstacles, online resources, forums, and communities become invaluable for advice and troubleshooting. Engaging with fellow enthusiasts not only helps overcome technical hurdles but fosters a sense of community, enriching your drone-building experience.
The First Test Flights
Overcoming Propeller Installation Mistakes
Once your drone is assembled, it’s time for the first test flights. However, initial attempts might not go as planned. A common error, like incorrectly installed propellers, can lead to unexpected flight behavior or even crashes. When this happens, take a step back, review your setup, and understand what went wrong. Correcting such mistakes reinforces your knowledge and gives you the confidence needed for future adjustments.
Resolving Binding Issues with the Remote
Another common challenge is binding the drone to the remote controller. This step, crucial for communication between your drone and remote, can be tricky. If your initial attempts fail, delve deeper into tutorials and forums to find solutions, often involving soldering additional components or firmware adjustments. This process, although tedious, eventually leads to a successful connection, allowing you to take your drone skyward.
Learning from Crashes
Understanding the Role of Crashing in Learning
In the realm of FPV drone flying, crashes are inevitable. You might find yourself frustrated initially, but understanding that crashing is a vital part of the learning curve can help maintain your enthusiasm. Each crash teaches you something about your drone’s limits and your piloting skills, helping guide future improvements. Embrace crashes as educational moments, essential for honing your skills and enhancing your understanding of FPV mechanics.
Strategies to Minimize Damage and Learn
While crashing cannot be entirely avoided, strategies exist to minimize damage and hasten learning. Start by flying in large, open spaces where obstacles are fewer. Practice fundamental maneuvers before attempting more complex tricks. Each flight becomes a practical lesson in control and precision, slowly building your confidence. Additionally, learning about proper repair techniques and having spare parts on hand ensures quick fixes, keeping you flying and learning continuously.
Mastering Advanced Maneuvers
Attempting the Knife Edge Gap
As your confidence grows, you’ll likely want to try more advanced maneuvers, like the knife edge gap. This technical trick involves flying your drone tilted at 90 degrees through narrow spaces. Achieving this requires precision and an understanding of your drone’s capabilities. Start practicing in broad spaces before moving to tighter gaps, and remember, each successful attempt is a testament to your growing skill and understanding.
Incremental Progress in Piloting Skills
FPV drone flying is as much about skill as it is about patience. Incremental progress is key; focus on mastering one skill before moving on to the next. Celebrate small victories, like smoother turns or precise landings, as each represents your continued growth. By building a solid foundation, you’ll gradually expand your repertoire of moves, conquering more complex challenges with confidence.
Building the Second Drone
Applying Lessons Learned from the First Build
Having completed your first build, diving into a second one feels less daunting. The lessons learned from your first experience are invaluable; you now understand which steps require extra attention and which components to choose for better compatibility. Applying this knowledge makes your second build notably smoother, reinforcing the skills you’ve acquired and solidifying your understanding of drone construction.
Achieving Efficiency in Time and Process
With experience, your ability to manage time and streamline the building process improves significantly. What took hours before now takes less time, as familiarity with parts and assembly steps increases your efficiency. This newfound skill not only makes the building process more enjoyable but also gives you confidence for future projects, affirming that mastery is within reach with practice and persistence.
The Mental Aspect of Building and Flying
Importance of Taking Breaks
Through the ups and downs of building and flying, the importance of taking breaks cannot be overstated. Frustration can lead to mistakes, so stepping away, even for a short time, allows you to return with a clearer mind and renewed energy. Recognizing when to pause prevents burnout and keeps the process enjoyable, fostering a healthier relationship with your new hobby.
Balancing Frustration and Productivity
Finding the balance between frustration and productivity is crucial. While challenges are part of learning, prolonged frustration can deter your progress. By cultivating patience and seeking help when needed, you can maintain forward momentum. Remember, building and flying drones is meant to be enjoyable—embrace the journey, relish the process, and let each step forward fuel your passion.
Conclusion
Reflecting on the Journey and Growth
Reflecting on your journey from Cinewhoop pilot to proficient 5” FPV drone builder and flyer, the growth and knowledge gained are truly rewarding. Each step, from initial assembly to mastering complex maneuvers, strengthens your skills and deepens your understanding of drone technology. This journey is an adventure, filled with both challenges and triumphs, marking significant personal growth.
Advice for Aspiring FPV Drone Builders
For those considering venturing into FPV drone building, embrace the learning curve with patience and enthusiasm. Research, plan meticulously, and engage with the FPV community for support and guidance. Accept that crashes and challenges are part of the process, but with persistence, the rewards are immense. Most importantly, enjoy the journey, as each step is a testament to your dedication and passion for flight.